manualshive.com logo in svg

Huawei RH2288 V3, User Manual

Share
Download
Huawei RH2288 V3 User Manual Download Page 221

The exported configuration data can be used to quickly restore the server configuration after
the mainboard is replaced. For details, see 

Import/Export

 in 

Huawei Rack Server iBMC

User Guide

.

NOTE

l

iBMC 2.32 and later versions support the import and export of configuration files.

l

After mainboard replacement, you can directly import the iBMC and BIOS configuration data
exported from the iBMC. However, the exported configuration files do not contain password
information. You need to manually configure the password for the iBMC user. For details, see

Import/Export

 in 

Huawei Rack Server iBMC User Guide

.

l

If the iBMC is inaccessible or the iBMC and BIOS configuration data is not exported before the
mainboard is replaced, you need to manually configure the iBMC and BIOS after replacing the
mainboard.

l

The iBMC and BIOS configuration files exported from the iBMC contain configuration items. For
details, see "Configuration File Description" in the 

Huawei Rack Server iBMC User Guide

.

Step 4

Wear an ESD wrist strap. For details, see 

1 Safety Instructions

.

Step 5

Determine the cabinet number and chassis number of the server, and label its panel to prevent
misoperations.

Step 6

Power off the RH2288 V3. For details, see 

4.2 Powering Off the Server

.

Step 7

Remove all external cables such as power and network cables.

Step 8

Remove the RH2288 V3 and put it on an ESD desktop. For details, see 

3.6 Removing the

Server

.

Step 9

Remove the chassis cover. For details, see 

7.11 Removing the Chassis Cover

.

Step 10

Remove the supercapacitor if it is installed. For details, see 

7.33 Removing the

Supercapacitor (Screw-in RAID Controller Card)

.

Step 11

Remove the riser cards. For details, see 

7.19 Removing the Riser Card

.

Step 12

Remove the air duct. For details, see 

7.13 Removing the Air Duct

.

Step 13

Remove all fan modules. For details, see 

7.15 Removing a Fan Module

.

Step 14

Press and hold down the latches on both sides of a fan module bracket, and lift the bracket.
Use the same method to lift the other fan module bracket. See steps (1) and (2) in 

Figure

7-90

.

RH2288 V3 Server
User Guide

7 Replacing Parts

Issue 32 (2019-03-28)

Copyright © Huawei Technologies Co., Ltd.

209

Summary of Contents for RH2288 V3




























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands