Huawei RH2288 V3, User Manual

Page: 84 / 315

Figure 3-9 Installing a holding rail
2. Aligning the screws on the back end of the holding rail with the mounting holes of the
cabinet, insert the rail into position so that the latch clicks into place. See step (3) in
Figure 3-9 .
3. Aligning the top screw on the front end of the holding rail with the level mounting hole
of the cabinet, insert the rail into position. See step (4) in
Figure 3-9 .
4. Push back the locking plate by its hook until the release latch clicks into place. See step
(5) in
Figure 3-9 .
5. (Optional) Secure the back end of the rail with an M6 screw through the corresponding
mounting hole in the cabinet. See step (6) in
Figure 3-9 .
6. Install the other guide rail using the same method.
Step 2
Install the server.
1. Pull out the inner rails as far as they will go. See Figure 3-10 .
RH2288 V3 Server
User Guide
3 Installing and Removing the Server
Issue 32 (2019-03-28) Copyright © Huawei Technologies Co., Ltd. 72