manualshive.com logo in svg

Huawei RH2288 V3, User Manual

Share
Download
Huawei RH2288 V3 User Manual Download Page 4

Symbol

Description

Calls attention to important information, best practices
and tips.
NOTE is used to address information not related to
personal injury, equipment damage, and environment
deterioration.

 

Change History

Changes between document issues are cumulative. The latest document issue contains all
changes made in previous issues.

Issue

Date

Description

32

2019-03-28

Deleted the LCD description.

31

2018-11-19

Optimized the flexible NIC indicator description. For
details, see 

2.4 Indicators and Buttons

.

30

2018-10-19

Added the list of components where the sensors are
located. For details, see 

11.3 Sensor List

.

29

2018-09-17

Added the description about the information that will
be lost after mainboard replacement and needs to be
configured again after the mainboard is replaced.
Added the link for importing and exporting the BMC
configuration file to sections 

7.42 Installing the

Mainboard

 and 

7.41 Removing the Mainboard

.

28

2018-08-17

Added the procedure for removing a holding rail. For
details, see 

3.6 Removing the Server

.

27

2018-07-12

Added procedures for removing and installing an SD
card and related precautions. For details, see 

7.49

Removing an SD Card Board

 and 

7.50 Installing an

SD Card Board

.

26

2018-05-29

Changed LOM and NIC to flexible NIC.

25

2018-05-10

Modified fan module removal and installation
procedures. For details, see 

7.15 Removing a Fan

Module

 and 

7.16 Installing a Fan Module

.

RH2288 V3 Server
User Guide

About This Document

Issue 32 (2019-03-28)

Copyright © Huawei Technologies Co., Ltd.

iii

Summary of Contents for RH2288 V3




























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands