NOTE
The user account will be locked if incorrect passwords are entered for five consecutive times. The user
account is automatically unlocked 5 minutes later.
Step 6
Select
This iBMC
from the
Domain
drop-down list.
Step 7
Click
Log In
.
The
Information Summary
page is displayed, showing the user name in the upper right
corner.
----End
9.3 Logging In to the iBMC CLI
Log in to the iBMC CLI using any of the following methods:
l
SSH
Secure Shell (SSH) is a network protocol that allows data to be exchanged over a secure
channel between two computers. A maximum of five users can access the iBMC CLI
over SSH at the same time.
l
Telnet
Telnet poses security risks and is disabled by default.
l
Local serial port
Before logging in to the iBMC CLI, ensue that the IP address, user name, and password of the
iBMC management network port are obtained.
The default iBMC IP address is
192.168.2.100
, user name is
root
, and password is
Huawei12#$
.
Logging In over SSH
Step 1
Connect the local PC to the iBMC management network port on the server by using a network
cable. Ensure that the IP addresses of the local PC and the iBMC management network port
are on the same network segment.
Step 2
Check the SSH service is enabled.
If the SSH service is disabled, 3.2 Logging In to the iBMC WebUI, choose
Configuration
>
Services
, and set
SSH
to
On
.
Step 3
Log in to the CLI over SSH.
The operations vary depending on the OS used on the local PC:
l
Linux
Run the
ssh iBMC IP address
command on the terminal tool.
l
Windows
a.
Download and install the client communications tool that supports SSH.
b.
Enter the user name, password, and IP address of the management network port on
the client communications tool to log in to the iBMC CLI.
----End
RH2288 V3 Server
User Guide
9 Common Operations
Issue 32 (2019-03-28)
Copyright © Huawei Technologies Co., Ltd.
270
