manualshive.com logo in svg

Huawei RH2288 V3, User Manual

Share
Download
Huawei RH2288 V3 User Manual Download Page 120

Figure 5-5

 Component information example

Figure 5-6

 System information example

NOTE

The preceding information is for reference only. The actual information displayed may differ.

Configure RAID.

4.

Configure RAID.
The configuration procedure varies according to the RAID controller card type. For
details about how to configure RAID, see the 

Huawei V2&V3 Server RAID Controller

Card User Guide

.

Supported RAID controller cards: SR320 (LSI SAS2208), SR420 (LSI SAS2208),
SR120 (LSI SAS2308), SR130 (LSI SAS3008), SR430C (1 GB/2 GB, LSI SAS3108),
SP435 (PM8060), and SR135 (PM8068)

5.5 Configuring the BIOS

Configure the BIOS of the RH2288 V3, including setting the server boot mode, selecting PXE
as a boot option, enabling the PXE function for a network port, and setting the BIOS

RH2288 V3 Server
User Guide

5 Configuring the RH2288 V3

Issue 32 (2019-03-28)

Copyright © Huawei Technologies Co., Ltd.

108

Summary of Contents for RH2288 V3




























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands