manualshive.com logo in svg

Huawei RH2288 V3, User Manual

Share
Download
Huawei RH2288 V3 User Manual Download Page 265

Step 4

Remove all external cables such as power and network cables.

Step 5

Remove the RH2288 V3 and put it on an ESD desktop. For details, see 

3.6 Removing the

Server

.

Step 6

Determine the position of the left mounting ear on the RH2288 V3. See 

Figure 7-137

.

Figure 7-137

 Position of the left mounting ear

Step 7

Remove the chassis cover. For details, see 

7.11 Removing the Chassis Cover

.

Step 8

Remove full-height full-length riser cards if they are installed. For details, see 

7.19 Removing

the Riser Card

.

Step 9

Remove the air duct. For details, see 

7.13 Removing the Air Duct

.

Step 10

Remove all fan modules. For details, see 

7.15 Removing a Fan Module

.

Step 11

Press and hold down the latches on both sides of a fan module bracket, and lift the bracket.
Use the same method to lift the other fan module bracket. See steps (1) and (2) in 

Figure

7-138

.

RH2288 V3 Server
User Guide

7 Replacing Parts

Issue 32 (2019-03-28)

Copyright © Huawei Technologies Co., Ltd.

253

Summary of Contents for RH2288 V3




























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands