manualshive.com logo in svg

Huawei RH2288 V3, User Manual

Share
Download
Huawei RH2288 V3 User Manual Download Page 254

Step 10

Locate the cables connecting the mainboard and the front disk backplane to the DVD-ROM
drive and the VGA board, and disconnect the cables from the mainboard and the front disk
backplane. For details, see 

2.7 Internal Cabling

.

Step 11

Loosen and remove the screws on the server. See step (1) in 

Figure 7-126

.

Figure 7-126

 Removing the VGA board from a server with eight 3.5-inch hard disks

Step 12

Push the panel out of the server. See step (2) in 

Figure 7-126

.

Step 13

Remove all cables connected to the VGA board.

Step 14

Loosen the screws on the VGA board. See step (3) in 

Figure 7-126

.

Step 15

Remove the VGA board in the arrow direction. See step (4) in 

Figure 7-126

.

Step 16

Place the removed VGA board in an ESD bag.

----End

Server with Eight 2.5-inch Hard Disks

Step 1

Wear an ESD wrist strap. For details, see 

1 Safety Instructions

.

Step 2

Determine the cabinet number and chassis number of the server, and label its panel to prevent
misoperations.

RH2288 V3 Server
User Guide

7 Replacing Parts

Issue 32 (2019-03-28)

Copyright © Huawei Technologies Co., Ltd.

242

Summary of Contents for RH2288 V3




























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands