manualshive.com logo in svg

Huawei RH2288 V3, User Manual

Share
Download
Huawei RH2288 V3 User Manual Download Page 65

Table 2-12

 RAS features

Mod
ule

Feature

Description

CPU

Corrected machine
check interrupt (CMCI)

Corrects error-triggered interrupts.

DIM
M

Failed DIMM isolation

Identifies a faulty dual in-line memory module
(DIMM), and isolates it from others before replacing
the DIMM.

Memory thermal
throttling

Automatically adjusts DIMM temperatures to avoid
damage due to overheating.

Rank sparing

Allocates memory ranks as backup ranks to prevent the
system from crashing due to uncorrectable errors.

Memory address parity
protection

Detects memory command and address errors.

Memory demand and
patrol scrubbing

Provides the memory patrol function for promptly
correcting correctable errors upon detection. If these
errors are not corrected promptly, uncorrectable errors
may occur.

Memory mirroring

Improves system reliability.

Single device data
correction (SDDC)

Provides a single-device, multi-bit error correction
capability to improve memory reliability.

Device tagging

Degrades and rectifies DIMM device faults to improve
DIMM availability.

Data scrambling

Optimizes data stream distribution and reduces the
error possibility to improve the reliability of data
streams in the memory and the capability to detect
address errors.

PCIe

PCIe advanced error
reporting

Improves server serviceability.

QPI

Intel QPI link level retry

Provides a retry mechanism upon encountering errors
to improve QPI reliability.

Intel QPI protocol
protection via CRC

Provides cyclic redundancy check (CRC) protection
for QPI packets to improve system reliability.

OS

Core disable for fault
resilient boot (FRB)

Isolates a faulty CPU during startup to improve system
reliability and availability.

Corrupt data
containment mode

Identifies the memory storage unit that contains
corrupted data to minimize the impact on running
programs and improve system reliability.

Socket disable for FRB

Isolates a faulty socket during startup to improve
system reliability.

RH2288 V3 Server
User Guide

2 Overview

Issue 32 (2019-03-28)

Copyright © Huawei Technologies Co., Ltd.

53

Summary of Contents for RH2288 V3




























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands