Fuji Xerox apeosport-IV 6080, Administrator'S Manual

Page: 459 / 705

Error Code
459
Pr
o
b
lem S
o
lving
15
016-507 [Cause] When using the Image Log Control feature, failed to forward the image
log to the server.
[Remedy] Either set the forwarding rule for image logs from the server to the
machine, or set [Transfer Image Log] to [Disabled].
016-508 [Cause] When using the Image Log Control feature, failed to forward the image
log to the server.
[Remedy] Set the forwarding rule for image logs from the server to the machine.
016-509
[Cause] When using the Image Log Control feature, failed to forward the image
log to the server because the forwarding rule for image logs from the
server to the machine has not been set.
[Remedy] Either set the forwarding rule for image logs from the server to the
machine, or set [Transfer Image Log] to [Disabled].
016-510 [Cause] When using the Image Log Control feature, failed to forward the image
log to the server because the forwarding rule for image logs from the
server to the machine has not been set.
[Remedy] Set the forwarding rule for image logs from the server to the machine.
016-511
016-512
[Cause] When using the Image Log Control feature, failed to forward the image
log to the server because the forwarding rule for image logs from the
server to the machine has not been set correctly.
[Remedy] Confirm the forwarding rule for image logs from the server to the
machine.
016-513 [Cause] An error occurred in connecting to the SMTP server. Probable causes
are as follows:
1)The SMTP server or network may be overloaded.
2)The source port number for SMTP is incorrect.
[Remedy] For 1), wait for a while, and then execute the operation again.
For 2), confirm whether the source port number for SMTP is correct.
016-514 [Cause] An error occurred during processing of an XPS document.
[Remedy] If an error occurred while printing from a driver which supports XPS,
print from the application using another print driver (PCL, etc.).
If an error occurred while direct printing an XPS document (such as
ContentsBridge Utility, E-mail, and Media Print - Text), print using the
print driver (PCL, etc.) from XPS Document Viewer.
016-515 [Cause] There was insufficient memory during processing of an XPS document.
[Remedy] Take one of the following measures:
z
Set [Image Quality] to [Standard]
z
Increase the amount of memory
z
Print using the print driver (PCL, etc.) from XPS Document Viewer.
For more information on [Image Options], refer to the help of the print driver.
016-516
[Cause] The Print Ticket included in the XPS document includes an invalid
description or a print setting not supported by the machine.
[Remedy] Check whether there is a problem with the method of using the
application that sent the print job, or with the content of the print
instruction.
If your application usage and print instruction are correct, check with the
application manufacturer that sent the print job for operations of the
application, not with Fuji Xerox.
If the error still is not resolved, contact our Customer Support Center.
016-517 [Cause] There is an error in the content described in the PostScript file.
[Remedy] Print with the PostScript driver. Furthermore, modify ProcessColorModel
described in the PostScript file so that the color mode does not change.
Error Code Cause and Remedy
* If you cannot resolve an error despite following the instructions described in the table, contact our Customer Support
Center. The contact number is printed on the label or card attached on the machine.