Fuji Xerox apeosport-IV 6080 Administrator'S Manual Download Page 513

Page: 513 / 705

Error Code

513

lem S

lving

033-560
033-561
033-562

[Cause] An error occurred during remote maintenance work.
[Remedy] This is an error occurring during remote maintenance work by Fuji

Xerox. No measure is required.

033-563

[Cause] Paper that can print faxed documents is not loaded in a tray.
[Remedy] Take one of the following measures:

Specify the paper size.

Confirm whether the paper tray is set correctly.

033-564

[Cause] The machine was turned off during communication.
[Remedy] Wait for a while, confirm the fax service settings and the fax number,

and then send again if sending. If the error still is not resolved, contact
our Customer Support Center.

033-565

[Cause] Cannot send because too many recipients are specified.
[Remedy] Wait until the number of jobs awaiting transmission decreases, or

reduce the number of recipients, and then send again.

033-566

[Cause] Cannot send because the recipient (fax number) is not specified.
[Remedy] Correctly specify the recipient's fax number.

033-567

[Cause] The recipient (fax number) is incorrect.
[Remedy] Correctly enter the recipient's fax number, and execute the operation

again.

033-568

[Cause] An error occurred during fax transmission.
[Remedy] Execute the operation again. If receiving, ask the sender to send again.

If the error still is not resolved, contact our Customer Support Center.

033-569

[Cause] Paper in the tray is not loaded in the direction that the received fax data

can be printed.

[Remedy] Load paper in Tray 5 according to the direction displayed on the screen.

033-570

[Cause] The machine was turned off during communication.
[Remedy] Wait for a while, confirm the Fax service settings and the fax number,

and then send again if sending. If the error still is not resolved, contact
our Customer Support Center.

033-571

[Cause] Cannot use the Fax service because of causes such as memory is

insufficient.

[Remedy] Cancel the fax data in the queue, or wait for a while, and execute the

operation again.

033-572

[Cause] The data received is not printed.
[Remedy] No measure is required. The data will be printed after a while.

033-573

[Cause] Attempted to send an IP fax (SIP) to the recipient (domain) that

transmissions are not permitted.

[Remedy] Take one of the following measures:

Confirm the recipient and re-specify a recipient.

Check the setting for Block Domains and re-specify a recipient.

033-574

[Cause] An unavailable line is specified.
[Remedy] Specify an available line.

033-575

[Cause] An error occurred during fax transmission.
[Remedy] Execute the operation again.

033-576

[Cause] The recipient (fax number) is incorrect.
[Remedy] Enter a correct fax number, and execute the operation again.

033-577

[Cause] An error occurred during fax transmission.
[Remedy] Execute the operation again.

Error Code

Cause and Remedy

* If you cannot resolve an error despite following the instructions described in the table, contact our Customer Support

Center. The contact number is printed on the label or card attached on the machine.

Summary of Contents for apeosport-IV 6080

































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for apeosport-IV 6080

Reviews:

Related manuals for apeosport-IV 6080

Brands by name

Popular brands

Fuji Xerox apeosport-IV 6080, Administrator'S Manual

Search results

Summary of Contents for apeosport-IV 6080

Reviews:

Related manuals for apeosport-IV 6080

Brands by name

Popular brands