Fuji Xerox apeosport-IV 6080, Administrator'S Manual

Page: 572 / 705

15 Problem Solving
572
P
roblem S
o
lv
ing
15
5
Pull up the metal part of the staple cartridge
as shown in the illustration.
6
Remove the jammed staples (1), and then
return the metal part pulled up in step 5 to
the original position (2).
7
Push the staple cartridge into the machine
until it clicks into place.
8
Close the finisher front door.
Note • If the finisher front door is not completely closed, a message will appear and the machine
remains paused.
If you cannot remove jammed staples even after you perform the above procedure,
contact our Customer Support Center.
Staple Jams in Staple Cartridge
(for D2-Staple-Finisher or D2-Staple-Finisher with Booklet Maker)
The following describes how to clear staple jam occurred in the staple cartridge of the
D2-Staple-Finisher (optional) and the D2-Staple-Finisher with Booklet Maker
(optional).
This section describes the procedure to remove the jammed staples in the D2-Staple-
Finisher with Booklet Maker, as an example. You can apply the same procedure to the
D2-Staple-Finisher.
1
Make sure that the machine is not operating,
and open the finisher front door.
CAUTION
Be careful in removing jammed staples.