Fuji Xerox apeosport-IV 6080, Administrator'S Manual

Page: 221 / 705

Web Applications Service Setup (ApeosPort Series Models Only)
221
T
ools
5
Web Applications Service Setup (ApeosPort Series Models Only)
In [Web Applications Service Setup] , you can specify the remote access destination.
Remote access allows you to view web application services, which are compatible with
the machine, directly on the touch screen, to upload a document that has been scanned
on the machine to the web applications, and to directly select and print a document that
is stored in the remote server. It also allows you to directly upload and print a file without
going through another computer.
Note • To use this feature, the External Access Kit (optional) and any Fuji Xerox manufactured web
applications (sold separately) are required. For more information, contact our Customer
Support Center.
1
On the [Tools] screen, select [Web Applications Service Setup] .
For the method of displaying the [Tools] screen, refer to "System Settings Procedure" (P.104).
2
Select an item to set or change.
Server Certificate Verification Settings
When the machine is connected to a remote server (ASP) that is located in the Internet
zone, server certificate verification is available to prevent phishing attempts as with a
Windows web browser. Configure the following settings.
Preparations
Download a root certificate (CA certificate) of the root certification authority, which
issues the server certificate for the remote server to be connected, to a computer
connected to CentreWare Internet Services.
The CA certificate formats that can be used are as follows:
z
DER encoded binary X.509 (.CER)
z
Base 64 encoded X.509 (.CER)
z
Cryptographic Message Syntax Standard - PKCS #7 Certificates (.P7B)
Setting Procedure
1
Start CentreWare Internet Services.
For information on how to start CentreWare Internet Services, refer to "Starting CentreWare Internet
Services" (P.270).
2
Generate a certificate.
If you use an approved device certificate, proceed to step 3.
1) Click the [Properties] tab.
2) Click [Security] to display the items in the folder.
3) Click [Machine Digital Certificate Management].
4) Click the [Create New Self Signed Certificate] button.
5) Set [Public Key Size] and [Issuer], and then click [Apply].
After a short while, [Settings have been changed.] is displayed.