Fuji Xerox apeosport-IV 6080 Administrator'S Manual Download Page 21

Page: 21 / 705

Interface Cables

Before Usi

g the Mac

Interface Cables

When connecting the machine directly to a computer, use the USB interface. When

connecting the machine to a network, use the Ethernet interface.

Using the USB Interface

The USB interface of the machine supports USB 2.0.
This section describes the installation procedures for the USB interface.

Press the power switch to the [

] position to switch off the power.

Make sure that the touch screen is blank and the <Energy Saver> button does not
light up.

Open the front cover.

Press the main power switch to the [

] position to switch off the main power.

Connect a USB cable to the USB 2.0
interface connector.

Connect the other end of the USB cable to the computer.

Press the main power switch to the [ | ] position to switch on the main power.

Close the front cover.

Press the power switch to the [ | ] position to switch on the power.

Restart the computer.

For more information on setting items, refer to "Printer Environment Settings" (P.275).

Using the Ethernet Interface

The Ethernet interface of the machine supports the following three types.

1000BASE-T (optional)

100BASE-TX

10BASE-T

Summary of Contents for apeosport-IV 6080

































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for apeosport-IV 6080

Reviews:

Related manuals for apeosport-IV 6080

Brands by name

Popular brands

Fuji Xerox apeosport-IV 6080, Administrator'S Manual

Search results

Summary of Contents for apeosport-IV 6080

Reviews:

Related manuals for apeosport-IV 6080

Brands by name

Popular brands