Fuji Xerox apeosport-IV 6080 Administrator'S Manual Download Page 479

Page: 479 / 705

Error Code

479

lem S

lving

018-559

[Cause] The same file name already exists.

[Do Not Save] is selected when duplicate file name exists.

[Remedy] Select any option other than [Do Not Save] in [File Name Conflict].

018-560

[Cause] An user authentication error occurred. (Received HTTP Status 401).
[Remedy] Check the followings:

The destination HTTP server for the scanned document is accessible
by PC.

The HTTP server name

The HTTP server path name

018-561

[Cause] The hostname or the script storage location is not correct. (Received

HTTP Status 404).

[Remedy] Check the followings:

The destination HTTP server for the scanned document is accessible
by PC.

The HTTP server name

The HTTP server path name

018-562

[Cause] A client-side error occurred. (Received HTTP Status 4xx other than 401

and 404).

[Remedy] Check the followings:

The destination HTTP server for the scanned document is accessible
by PC.

The server settings

018-563

[Cause] A server-side error occurred. (Received HTTP Status 5xx).
[Remedy] Check the followings:

The destination HTTP server for the scanned document is accessible
by PC.

The server settings

018-564

[Cause] DNS resolution for the specified hostname failed.
[Remedy] Check the followings:

The destination HTTP server for the scanned document is registered
on the DNS server.

The machine is connected to the DNS server.

The address of the DNS server is set on the machine.

018-565

[Cause] DNS resolution for the proxy server name set on the machine failed.
[Remedy] Check the followings:

The proxy server name set on the machine is registered on the DNS
server.

The machine is connected to the DNS server.

The address of the DNS server is set on the machine.

018-566

[Cause] Unable to connect to the HTTP server.
[Remedy] Check the followings:

The network cable connection on the machine

The destination HTTP server for the scanned document is accessible
by PC.

018-567

[Cause] The followings may be the cause:

The communication is disconnected while reading or writing due to
some reason.

Close process of the file failed due to some reason

[Remedy] Check whether the destination HTTP server for the scanned document

is accessible by PC.

Error Code

Cause and Remedy

* If you cannot resolve an error despite following the instructions described in the table, contact our Customer Support

Center. The contact number is printed on the label or card attached on the machine.

Summary of Contents for apeosport-IV 6080

































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for apeosport-IV 6080

Reviews:

Related manuals for apeosport-IV 6080

Brands by name

Popular brands

Fuji Xerox apeosport-IV 6080, Administrator'S Manual

Search results

Summary of Contents for apeosport-IV 6080

Reviews:

Related manuals for apeosport-IV 6080

Brands by name

Popular brands