Fuji Xerox apeosport-IV 6080, Administrator'S Manual

Page: 597 / 705

Printable Area
597
Ap
pe
ndix
16
Printable Area
This section describes the area on paper that can be printed.
Standard Printable Area
The standard printable area is the area of a sheet of paper excluding the 4.0 mm
margins on all four edges of paper. The actual printable area, however, may vary
depending on the printer (plotter) control language.
Extended Printable Area
When you select the extended printable area setting for both the printable area and the
print assured area, you can expand the width and length to 297.0 x 449.2 mm for
printing, and 297.0 x 432.0 mm for copying. The area of paper you can print to,
however, may vary depending on the size of paper.
Note • To extend the printable area, change the PCL print driver setting, or the [Print Area] setting
on the touch screen.
For more information on the setting method on the print driver, refer to the help provided for the print
driver. For more information on the setting on the control panel, refer to "Print Area" (P.187).
„ When the paper width is less than 12 inches (A3)
Printer Copy
4mm
3.9mm 3.9mm
4mm
Unprintable area
Printable area/
Guaranteed
print area
Paper feed
direction
12.6mm
12.6mm
3.9mm 3.9mm
Unprintable area
Printable area/
Guaranteed
print area
Paper feed
direction