Fuji Xerox apeosport-IV 6080, Administrator'S Manual

Page: 548 / 705

15 Problem Solving
548
P
roblem S
o
lv
ing
15
Paper Jams in the Finisher-C1 / Finisher-C1 with Booklet Maker
The following describes how to clear paper jam occurring in the Finisher-C1 (optional)
and the Finisher-C1 with Booklet Maker (optional).
This section describes the procedures to remove the jammed paper from the Finisher-
C1 with Booklet Maker, as an example. You can apply the same procedures to the
Finisher-C1.
Paper Jams at [1a] in the Finisher .............................................................................................548
Paper Jams at [2a] in the Finisher .............................................................................................549
Paper Jams at [2a] in the Finisher (Using Knob [2c])...............................................................550
Paper Jams at [2b] in the Finisher.............................................................................................551
Paper Jams at [2b] in the Finisher (Using Knob [2c]) ..............................................................551
Paper Jams at [3] in the Finisher...............................................................................................552
Paper Jams at Cover [H] in the Finisher ...................................................................................553
Paper Jams at [4a] in the Finisher (For Finisher-C1 with Booklet Maker)...............................553
Paper Jams at [4b] in the Finisher (For Finisher-C1 with Booklet Maker) ..............................554
Paper Jams in the Booklet Tray (For Finisher-C1 with Booklet Maker)..................................555
Paper Jams at [1a] in the Finisher
1
Make sure that the machine is not operating,
and open the finisher front door.
2
Move the handle [1a] to the right.
3
Remove the jammed paper.
Note • If paper is torn, check for any torn pieces
of paper inside the machine.
4
Return the handle [1a] to the original position.
5
Close the finisher front door.
Note • If the finisher front door is not completely closed, a message will appear and the machine will
remain paused.