Fuji Xerox apeosport-IV 6080, Administrator'S Manual

Page: 481 / 705

Error Code
481
Pr
o
b
lem S
o
lving
15
018-579 [Cause] The hard disk on the NetWare server may be full.
[Remedy] Check the followings:
z
The NetWare server is accessible by PC
z
The free space of the server to store data
Run DSREPAIR at the server console on the NetWare server.
018-580 [Cause] The specified volume name does not exist on the NetWare server.
[Remedy] Check the followings:
z
The NetWare server is accessible by PC
z
The volume name
Run DSREPAIR at the server console on the NetWare server.
018-581
[Cause] The specified directory path does not exist on the NetWare server.
[Remedy] Check the followings:
z
The NetWare server is accessible by PC
z
The directory path name
Run DSREPAIR at the server console on the NetWare server.
018-582 [Cause] The followings may be the cause:
z
The login user does not have Open rights to the file.
z
The login user does not have Create rights to create a file.
z
The login user does not have Access rights to the directory.
z
The login user does not have Read rights to the file.
z
The login user does not have Write rights to the file.
z
The login user does not have Delete rights of the directory or file.
z
Made a delete request to the directories or files but all of them are
read-only.
z
Made a delete request to the directories or files but some of them are
read-only.
[Remedy] 1) Check whether the NetWare server is accessible by PC.
2) Check the user has the following rights.
- Open rights to the file
- Create rights to a file
- Access rights to the directory
- Write rights to the file
- Read rights to the file
- Delete rights to the directory or file
3) Run DSREPAIR at the server console on the NetWare server.
018-583
[Cause] A hard disk error occurred on the NetWare server.
[Remedy] 1) Check the status of the HDD on the NetWare server.
2) Check whether the NetWare server is accessible by PC.
3) Run DSREPAIR at the server console on the NetWare server.
018-584
[Cause] The followings may be the cause:
z
The communication is disconnected while reading or writing due to
some reason
z
Close process of the file failed due to some reason
[Remedy] 1) Check whether the NetWare server is accessible by PC.
2) Run DSREPAIR at the server console on the NetWare server.
Error Code Cause and Remedy
* If you cannot resolve an error despite following the instructions described in the table, contact our Customer Support
Center. The contact number is printed on the label or card attached on the machine.