Fuji Xerox apeosport-IV 6080, Administrator'S Manual

Page: 207 / 705

Fax Service Settings
207
T
ools
5
Block Inbound Faxes
Set a G3-ID (fax number) from which you want to reject a fax reception. You can specify up to
50 G3-IDs.
You can find the G3-ID of the sender that you want to reject in "Remote Station" column of an
Activity Report or "Input Source" column of a Job History Report.
Block Unknown Fax Numbers
Set whether or not to receive faxes from unknown G3-ID fax numbers. When [Yes] is
selected, the machine does not receive faxes from unknown fax numbers.
Fax Received Options
Fax Received Options allows you to specify a method for classifying received fax
documents into specified folders.
Folder Selector Setup
If you set the classification by line type, the machine classifies the received documents by line
type and store them in the folders specified.
1
Select [Folder Selector Setup].
2
Select the line to register, and then select
[Change Settings].
Note • The displayed items may vary depending
on the options installed.
3
Select [On].
4
Enter the folder number (three digits) where you want to store the faxes with the
numeric keypad.
5
Select [Save].
Output Destination Setup
In [Output Destination Setup], you can set the output destination for each receiving line.
Note • This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.
• The displayed items may vary depending on the options installed.
„ Fax Received - Line 1 to 3
Specify output tray for each line.
„ Fax Received - SIP
Specify output tray for IP fax (SIP).