Foma N903i, Manual

Page: 55 / 580

53
Continued on next page
Voice/Videophone Calls
Making a Voice/Videophone Call
d
Making a voice call
1
Dial the other party’s number, starting with the area code
The “Phone number entry” screen appears.
Always start with the area code, even for calls within the same area.
A number of up to 80 digits can be entered for making a call although the numbers disappear
from the display one by one from the beginning after the number exceeds 26 digits.
2
r
The phone number disappears briefly and then reappears from the right as it is dialed.
The “
” icon flashes during dialing and remains lit during a call.
The “In-call” screen appears.
■
To switch to a videophone call during a voice call
“Changing a call from voice to videophone” → p.57
■
If you hear the busy tone
The line is busy. Press
y
, and call again after a while.
■ If you hear the message saying that the other party cannot be reached
The other party’s mobile phone or PHS phone is not switched on or is out of signal
range. Press
y
, and call again after a while.
■
If you hear the message requesting your caller ID
The other party has set the Caller ID Request service to “Activate”. Call again with your caller ID shown.
3
To end the call, press
y
Function menu (Phone number entry screen)
■
To call a mobile phone
090 −××××−××××
or
080
−××××−××××
■
To call a PHS phone
070 −××××−××××
NOTE
e
You can make calls while in i-mode or sending or receiving mails.
e
A Chaku-moji message up to 10 characters (including pictographs, symbols, double-byte and single-byte
characters) can be attached to a call to be made. The Chaku-moji message appears on the screen of the other
party’s phone when it rings.
→ p.65
e
You cannot make calls during 64K data communication, videophone calls or PushTalk calls. However, if the other
party’s FOMA terminal can change the call mode, you can change a call from videophone to voice by selecting
“Change to voice” from the function menu. (This function is available between terminals that support change
between voice call and videophone call.)
→ p.58
e
You can also send photographs taken with the built-in camera to the other party during a call (Speed photo mail). → p.242
e
While you are dialing to a person of which name and phone number are stored in the phonebook, the name and icon
selected for the phonebook entry appear. However, an image does not appear even if it is stored in a phonebook entry.
e You can talk in hands-free mode during a call. → p.61
e
You can make calls using a flat-plug earphone/microphone with switch (optional). → p.412
Notify Caller ID “Showing Your Phone Number to the Other Party” → p.68
Prefix numbers
X
Select a prefix name to add
“Setting Prefix Numbers” → p.69
Chaku-moji “Making a call with a Chaku-moji message”
→
p.66
Int’l call “Making an international call with international call codes added” → p.59
Multi Number “Multi Number” → p.424
Add to phonebook “Adding Phonebook Entries”
→
p.107
Compose message “Creating and Sending i-mode Mail” → p.239
Connection speed Selects the connection speed used for videophone calls from “64K” or “32K”.
Select image “Setting an image to send during a videophone call”
→
p.86
Selecting “Release settings” cancels the setting of “Me” or “Chara-den”.
Phone number entry
Ｓｔｏｒｅ
Ｖ．ｐｈｏｎｅ
ＦＵＮＣ
Function menu
¨
p.53
− − Area code Local code Phone number
In-call
ＦＵＮＣ
［Ｔａｌｋｉｎｇ］
１ｍ３０ｓ
Function menu
¨
p.54