Foma N903i, Manual

Page: 128 / 580

126
Tone/Display/Lighting Settings
What is 3D sound?
The 3D sound function uses the stereo speaker (or stereo earphone set) to produce 3 dimensional
and resonating sounds. This function allows you to enjoy i-
α
ppli-based games and melody playback
with richer and more realistic sounds.
How to enjoy 3D sound
d
To enjoy 3D sound to the fullest, positioning a FOMA terminal in front of you and holding
it approximately 20 to 30 cm away from you will produce the best results.
d
If you listen at an off-center position or you are too close or too far away from a FOMA
terminal, the effect may be diminished.
d
The 3D effect differs depending upon the individual. If 3D sound bothers you, set
“Surround”, “3Dsound” and “SRS_WOW” (p.126) all to “OFF”.
<Sound effect>
MENU64
Setting Sound Effects for Ring Tones and Melodies
Use this function to get a richer fuller sound when a FOMA terminal plays melodies, ring tones for
voice, videophone and PushTalk calls, sound effects and i-motion sound.
1
i
X
“Settings”
X
“Incoming call”
X
“Sound effect”
X
Set “ON” or
“OFF” for the following
Adding sound effects to i-motion playback sound
When you play an i-motion with sound effects, the effects simultaneously enhance the sound played
through the speaker and earphones. Sound played through the speaker is enhanced by effects that
provide clearly defined voice and music audio, and stereo sound played through earphones is
enhanced by effects that provide a natural-sounding 3D sound field and rich low tones as well as
clearly defined voice and music audio.
d
i-motion programs with sound effects can be identified by the icon shown on the movie list screen.
→
p.331
e
Depending on the precedence setting or combination of a ring tone and receiving screen, either the ring tone or the
receiving screen may revert to the one set at the time of purchase.
e
The ring tone for voice calls with the caller ID hidden can be set in the “Call setting w/o ID” menu. The ring tone for
videophone calls with the caller ID hidden is set according to the “Videophone” setting in this function.
e When an i-motion is set as the mail ring tone, the packet communication ring tone is set to the default in “Mail”. The
special receiving screen appears during packet communication regardless of the receiving screen settings.
e
Even if you have set a Chaku-Uta-Full
®
including the jacket image, the image does not appear when a call or mail arrives.
<Ring tone priority sequence>
e
Priority is assigned as follows for the ring tone operation when voice call/videophone call settings are duplicated:
① Ring tone for Multi Number (Additional Number 1 and 2) → p.424
② Ring tone for Discern connect → p.118 ③ Ring tone for Discern group → p.118
④
Ring tone for Select ring tone/Kisekae Tool setting (videophone call)
→
pp.124, 142
⑤ Ring tone for Call setting w/o ID → p.173
⑥ Ring tone for Select ring tone/Kisekae Tool setting (except videophone call) → pp.124, 142
Discern connect or Discern group priority sequence is as follows:
① i-motion for Ring tone ② i-motion for Image
③ i-motion (without video, such as singer’s voice) or melody for Ring tone
Priority sequence for ring tone when mail settings are duplicated → pp.251, 280
Default setting Surround: OFF 3Dsound: ON SRS_WOW: OFF
Surround Sets natural 3-dimensional sound. The sound you are playing sounds like it is further away from the
actual position of 2 speakers.
3Dsound Plays 3 dimensional stereophonic sound from the stereo speakers.
SRS_WOW “Adding sound effects to i-motion playback sound”
→
p.126