Foma N903i, Manual

Page: 201 / 580

199
Continued on next page
Camera
d
If the auto timer is set
The “ ” icon appears on the
screen to show that the auto
timer is set.
c
To cancel the auto timer settings, set “Auto timer”
to “OFF” from the function menu.
d
Shooting by using the auto timer
1
d
or
s
( )
The auto timer tone sounds, and then the auto
timer starts running. The incoming call lamp,
o
,
p
and “ ” flash.
The countdown tone sounds approximately 5
seconds before the shooting. The incoming call
lamp,
o
and
p
flash rapidly.
■ To stop the timer while it is running
X o
(Quit) or
t
■
To shoot manually during the auto timer
countdown
X
d
or
s
( )
<Bar code reader>
Using the Bar Code
Reader
Using the rear camera allows a FOMA terminal
to scan JAN codes and QR codes. The data
scanned especially from QR codes can be used
for displaying/copying the text, using the
functions of Phone To/AV Phone To, Mail To,
Web To, i-
α
ppli To, or adding to bookmark/
phonebook. The FOMA terminal can also scan
image or melody data to play or save.
c
A FOMA terminal can save up to 5 scanned
data.
c
Hold a FOMA terminal firmly so that it does not
shake during scanning.
c
When scanning a bar code, keep about 7 to 9 cm
between the rear camera and the code.
■
JAN codes and QR codes
c
JAN code
JAN code is a series of vertical
lines (bars) with various widths
and spaces to represent
numbers. A FOMA terminal
can scan 8-digit (JAN8) and
13-digit (JAN13) bar codes.
* Scanning the JAN code above displays “4942857113068”.
c
QR code
QR code is a type of two-
dimensional symbology
expressing numbers, alphabets,
kanji, kana or pictographs both
horizontally and vertically. Some
QR codes express images or
melodies. Some data are divided
into several QR codes.
* Scanning the QR code above displays “ 株式会社 NTT ドコ
モ ” (NTT DoCoMo, Inc.).
Scanning codes
1
i
X
“LifeKit”
X
“Bar code reader”
2
Position a JAN code
or QR code inside
the recognition field
Scanning automatically starts.
The area surrounded by “
┏
,
┓
,
┗
,
┛
” at the corners of the
screen is the recognition field.
Focus the JAN code or QR code so that the entire
code appears as large as possible inside the
recognition field.
■ To cancel scanning
X
d
X
d
■ To adjust the zoom
h
: Returns to default.
j
: Zooms in.
■
To turn on/off the light
X
p
(FUNC)
X
“Light”
X
“ON” or “OFF”
Pressing
a
( ) also turns on/off the light
after scanning is canceled.
■
To use auto focus
X o
(AF)
(
The focus frame changes as follows during
scanning:
a
White: Before focusing
a
Dotted white: Focusing
a
Green: Focused
a Dotted red: Focusing failed
3
Check the scanned data
It may take long to scan some data.
■ To scan data divided into several QR
codes
X
d
X
Repeat Steps 2 to 3
A FOMA terminal can scan up to 16 QR codes
expressing one data.
■ To discard scanned data
X
t
X
“YES”
4
p
(FUNC)
X
“Store”
X
“YES”
X
d
The scanned data is stored.
NOTE
e
Exiting the camera sets the auto timer to “OFF”.
Ｒｅｃｏｒｄ ＦＵＮＣ