Foma N903i, Manual

Page: 176 / 580

174
Security Settings
<Ring time(sec.)>
MENU90
Muting Ring Tones for Callers Not Listed in the Phonebook
Use this function to set the mute time until a FOMA terminal starts ringing when receiving a voice,
videophone or PushTalk call of which caller is not stored in the FOMA terminal (Phone) phonebook or
UIM phonebook (Set mute seconds). You can prevent accidentally making a call using the Received
calls record to a number such as a nuisance caller that only rings for a short period of time.
d
The specified mute seconds is also enabled when you receive a voice, videophone or PushTalk call hiding
the caller ID, or receive a call during another voice, videophone or PushTalk call.
d
If “Reject unknown” is set to “Reject”, you cannot set “Set mute seconds”.
1
i
X
“Settings”
X
“Incoming call”
X
“Ring time(sec.)”
X
Select any item
<Reject unknown>
Blocking Calls from Callers Not Listed in the Phonebook
You can specify whether a FOMA terminal accepts or rejects calls from phone numbers that are not
stored in the FOMA terminal (Phone) or UIM phonebook.
d This function is only valid when a caller shows the caller ID. This function should be set in conjunction with
“Caller ID Request” and “Call setting w/o ID”.
d
If “Set mute seconds” under “Ring time(sec.)” is set to “ON”, you cannot set “Reject unknown”.
1
i
X
“Settings”
X
“Lock/Security”
X
“Reject unknown”
X
Enter your
security code
X
“Reject”
■
To receive calls from callers who are not stored in the phonebook
X
“Accept”
Default setting Set mute seconds: OFF Mute seconds: 1 second Missed calls display: Display
Set mute
seconds ON
X
Enter a mute time (01 to 99 seconds)
Sets the time for which a ring tone is muted before a FOMA terminal starts ringing.
OFF Sets 0 seconds to the time for which a ring tone is muted before a FOMA terminal starts ringing.
Missed calls display Specifies whether to show received calls for which no ring tone sounded in the Missed calls record.
NOTE
e
While a FOMA terminal is ringing, a ring tone sounds, the terminal vibrates, the incoming call lamp lights up or
flashes and an incoming call is indicated on the image window.
e
When you receive a call from a caller stored in the phonebook as a secret entry, a FOMA terminal operates as
specified in this function.
e
If the time set in Set mute seconds is longer than the ring time for the Record message function, a FOMA terminal
switches directly to Record message without ringing. To have a ring tone sound before a message is recorded, set
a longer ring time for Record message than the time set in Set mute seconds. The same applies to the ring times
for Voice Mail, Call Forwarding and Automatic answer.
NOTE
e
When “Call setting w/o ID” accepts calls from payphones or calls hiding the caller ID, a FOMA terminal acts
according to the “Call setting w/o ID” setting even if this function is set to “Reject”.
e When you receive a call from a caller who is stored in the phonebook as a secret entry, the call is accepted even if
this function is set to “Reject”.
e
When phone numbers are specified in “Call acceptation” in “Restrictions”, you can only receive calls from the
phone numbers even if this function is set to “Accept”.
e
When “Reject” is selected for this function and you receive a call from a phone number not stored in the
phonebook, the call is logged as a missed call in the “Received calls” record and the “Missed call” desktop icon
appears on the standby screen. Even if the “Voice Mail” or “Call Forwarding” service is set to “Activate”, the caller
hears a busy tone. However, if the ring time for the “Voice Mail” or “Call Forwarding” service is set to 0 (zero)
seconds, or if a FOMA terminal is turned off or out of the service area, the caller does not hear a busy tone and the
call is handled by the “Voice Mail” or “Call Forwarding” service. When this happens, the phone number of the
received call is not logged in the “Received calls” record and the “Missed call” desktop icon does not appear on the
standby screen.
e A FOMA terminal receives i-mode mails and SMS regardless of this function.
Default setting
Accept