Foma N903i, Manual

Page: 538 / 580

21
8
Confirm the Access point (APN) on “
接続先（
APN
）の選択
” (Select
the access point (APN)) and click “
次へ
” (Next)
To specify advanced settings (TCP/IP settings)
Clicking “ 詳細情報の設定 ” (Detailed settings) displays the setup screen for “IP address” and
“Name server”. If they must be input as the provider or corporate LAN information, follow the input
information directions and enter the addresses.
9
Specify a user name and
password, select the accessible
user and click “
次へ
” (Next)
When “
すべてのユーザー
” (All users) is
selected in the “
使用可能ユーザーの選択
”
(Selecting accessible user) column, the
connection setting is applied to all the users
registered in Windows.
When setting the user name and password,
input the correct, case-sensitive data provided
by the service provider.
10
Check “
最適化を行う
” (Optimize the setting) and click “
次へ
” (Next)
Optimize “W-TCP
設定
” (W-TCP settings) required for “Packet communication”. If they are already
optimized, this screen does not appear. Proceed to Step 11.
11
Check the setting information
and click “
完了 ” (Finish)
The contents of the settings are listed. Make
sure that all settings are correct.
Checking “
デスクトップにダイヤルアップの
ショートカットを作成する ” (Add dial-up
shortcut on desktop) automatically creates a
shortcut icon.
To change any setting, click “
戻る ” (Back).
12
Click “OK”
You need to restart the PC to enable the changes in the settings. If the restart selection screen
appears, click “
はい
” (Yes).
Execute communication.
→
p.24