Foma N903i, Manual

Page: 172 / 580

170
Security Settings
d
The face authentication technology does not guarantee complete identification. NTT DoCoMo shall not be
liable for any losses or damages to you arising from use by a third party or misauthentication.
1
i
X
“Settings”
X
“Lock/Security”
X
“Face
authentication”
X
Enter your security code
2
“ON”
X
“OK”
The “New image” screen appears. Read the cautions carefully.
■ To cancel Face authentication
X
“OFF”
X
“YES” or “NO”
3
Adjust your eyes to the guide frame
X
d
The shot is repeated three times. Each shot is saved.
If the save or shot is not completed, the already saved shot is deleted, so that no image is
stored.
When three shots are completely saved, the “Edit image name” screen appears.
■ To stop shooting halfway
X t X
“YES”
4
Enter an image name
X
“YES”
The entered image name is used as a keyword in case that the authentication fails.
An image name can contain 2 to 8 double-byte or 4 to 16 single-byte characters.
■ To edit an image name
X
Select “NO” or the image name
5
Use
c
to select a checkbox ( □ )
X
o
(Finish)
The checked ( ) items are subject to Face authentication. Deselect items for which you do not want to use
Face authentication.
Function menu (Face authentication screen)
d
Using Face authentication to temporarily release Keypad lock
If you have stored an image for Face authentication and selected Keypad lock for Function to reset,
Face authentication is performed to identify that you are the owner of the FOMA terminal when
releasing the lock.
d
If Face authentication fails, enter the image name registered as a keyword for “Face authentication” to
release the lock.
d
To use Face authentication to release IC card lock → p.303
1
Press
p
( ) on the standby screen
The “Face scanning” screen appears.
New image Stores images.
Edit image name
X
Enter an image name
X
“YES”
Delete image Deletes images.
Function to
reset Selects the function to release using Face authentication.
X
Use
c
to select a checkbox ( □ )
X
o
(Finish)
NOTE
e
Keep a separate note of the stored image name, which is required in case authentication fails. To prevent others
from knowing it, use a character combination that cannot be easily guessed.
e
If the same image is used for a long period of time, the authentication may fail because your face changes due to
age, sunburns or scars. To maintain high successful authentication rate, you are recommended to update your
image occasionally.
e
If IC card lock or Keypad lock is set to “Function to reset” and IC card authentication is also set to on at the same
time, Face authentication is activated before IC card authentication.
ＯＮ
ＯＦＦ
Face authentication
Ｓｅｌｅｃｔ ＦＵＮＣ
Ｆａｃｅ ａｕｔｈｅｎｔｉｃａｔｉｏｎ ｉｓ ｕｓｅｄ
ｂｙ ｃａｎｃｅｌｌａｔｉｏｎ ｏｆ
ＩＣ ｃａｒｄ ｌｏｃｋ ａｎｄ ｋｅｙｐａｄ ｌｏｃｋ
［ＦＵＮＣ］ ｓｅｌｅｃｔ ｔｏ ｕｓｅ
ｆａｃｅ ａｕｔｈｅｎｔｉｃａｔｉｏｎ ｏｒ ｎｏｔ
Ｆａｃｅ ａｕｔｈｅｎｔｉｃａｔｉｏｎ
Function menu
¨
p.170
New image
ａｕｔｈ．