Foma N903i, Manual

Page: 197 / 580

195
Continued on next page
Camera
*1 ： The options cannot be set in Movie mode.
*2 ： The option cannot be set in Continuous mode.
d
Avoiding the flicker on the
photographed images
Setting this function according to the frequency
of power supply in the area you use the FOMA
terminal may decrease flicker on the screen that
is caused by fluorescent light, etc.
1
Photo mode screen (p.185)/
Continuous mode screen (p.189)/
Movie mode screen (p.192)
X
p
(FUNC)
X
“Image quality”
X
“Image tuning”
X
Select any item
d
Setting the shake correction
The shake correction function is available for
shooting with the rear camera.
c
This function is available in Photo mode, Movie
mode, Chance capture or Picture voice. It is
unavailable in Continuous mode.
1
Photo mode screen (p.185)/Movie
mode screen (p.192)/
X
p
(FUNC)
X
“Shake correction”
X
Select any
item
Function menu (Movie checking screen)
Auto
*1
(default: Photo
mode/Continuous
mode)
Selects the shooting mode
automatically.
Portrait
(default: Movie
mode)
Suitable for shooting people.
Scenery Suitable for shooting scenery
(including night view).
Close-up Suitable for close-up shooting.
“Close-up”
→ p.178
Sports mode
*1
Suitable for shooting moving
objects.
Night mode
*1*2
Suitable for shooting people in dark
places.
OFF
*1
Does not use any effects for
shooting.
NOTE
e
Only Portrait, Night mode and OFF can be selected
for the front camera in shooting a still image. Portrait
is always selected for shooting in Continuous mode or
Movie mode with the front camera.
e
In Night mode or Scenery, the shake correction may
not properly work even if Shake correction is set to
“Auto”.
e Auto, Scenery, Close-up or Sports mode is restored
to Portrait when the camera is switched to the front.
e
Auto, Sports mode, Night mode (in Photo mode only)
or OFF is restored to Portrait when Photo mode or
Continuous mode is switched to Movie mode or
Chance capture.
e
Night mode is restored to Auto when Photo mode is
switched to Continuous mode.
Auto
(default)
Avoids flicker automatically.
Mode 1(50Hz) Mode for shooting in 50Hz-
frequency areas.
Mode 2(60Hz) Mode for shooting in 60Hz-
frequency areas.
NOTE
e
The flicker may not be fully avoided if you shoot in dim
conditions or extremely bright places or depending on
the colors of objects.
Auto
(default)
■ Photo mode (Photo mode,
Picture voice)
Automatically corrects camera
shake in a place where camera
shake can easily occur or in a dark
place.
■ Movie mode (Movie mode,
Chance capture)
Always corrects camera shake
regardless of the situation.
OFF Shoots without using the shake
correction.
NOTE
e
This function only reduces the camera shake, and the
effect depends on the objects or situations.
e
The shake correction may not properly work when:
a
The camera shake is large
a
The zoom is used
a
The object is moving
a
“Photo mode” is set to “Night mode” or “Scenery”
e The spectrum or noise may be seen if part of the
object is moving. In this case, set this function to
“OFF” to shoot.
e
The shake correction uses the ambient pixels. The
shooting area varies depending on the “Auto”/“OFF”
setting.
e
If this function is activated, the processing time after
shooting may be longer (about two seconds) due to
the shake correction process.
Play Plays the movie you shot.
Save Saves the movie to the folder
specified in “Select to save”.
Compose
message
X
Compose an i-mode message
Composes an i-mode message with
the movie attached.
Set as stand-by Sets the movie as the standby
screen.
Display size Sets the display mode for movies.
The display size cannot be specified
if the image size is neither QCIF
(176 × 144) nor SubQCIF (128 ×
96).
• Actual size
(default)
Displays a movie in the actual size.
• Fit in display Enlarges a movie to the display size.