Foma N903i, Manual

Page: 73 / 580

71
Continued on next page
Voice/Videophone Calls
<In-car hands-free>
Making Hands-free Calls in a Car
By connecting your FOMA terminal to a hands-free device such as “In-Car Hands-Free Kit 01” (optional)
or a car navigation system, you can make or receive voice calls, etc. with the hands-free device.
For information about how to use a hands-free device, refer to the instructions provided with the
device. Note that FOMA In-Car Hands-Free Cable 01 (optional) must be used with In-Car Hands-Free
Kit 01 (optional).
Receiving a Voice/Videophone Call
d
Receiving a voice call
1
When a call arrives, press
r
or
d
When a call arrives, a FOMA terminal rings, the incoming call
lamp flashes and the “Ringing” screen appears.
Unless “Phone” under “Vibrator” is set to “OFF”, the FOMA
terminal also vibrates to notify you of the call.
The image display also notifies you of the call by displaying the
caller’s name.
→ p.32
■ If a call with a Chaku-moji message arrives
A Chaku-moji animation appears on the screen. You may
know the contents beforehand.
→ p.65
2
To end the call, press
y
Function menu (voice/videophone ringing screen)
NOTE
e
To operate from a hands-free device, set USB mode setting to “Communication mode”. → p.361
e
The display and ring tones for incoming calls and mails work according to the FOMA terminal settings.
e
If a FOMA terminal is connected to a hands-free device and set up so that the sound is emitted from the hands-free
device, the ring tone still sounds through the hands-free device for incoming mails or voice, videophone and
PushTalk calls even when Manner mode is set or the ring volume is set to “Silent”.
e
When Public mode (Driving mode) is set, a FOMA terminal works for incoming calls and mails as specified in the
“Public mode” settings.
e When Record message is set, a FOMA terminal works for incoming calls and mails as specified in the “Record
message” settings.
e
If you make a videophone call from a hands-free device using the phonebook or Redial record, the connection
speed set in the hands-free device is applied. If no connection speed is set, “64K” is used.
e
While a FOMA terminal is connected to a hands-free device and set up so that sound is emitted from the FOMA terminal,
“Setting when folded” is applied to the operation performed when the FOMA terminal is folded. If the hands-free device is
set to emit sound and the FOMA terminal is folded, the call condition does not change regardless of “Setting when folded”.
Call Rejection Ends the call without answering it.
Call Forwarding Forwards the call.
The call is forwarded regardless of whether the “Call Forwarding” setting is “Activate” or “Deactivate”.
Voice Mail Connects the caller to the Voice Mail service center.
The caller is connected to the service center regardless of whether the “Voice Mail” setting is “Activate” or
“Deactivate”.
Change Display Changes the display from Additional Number 1 or 2 to the number from which the call is forwarded.
This setting is available when Multi Number (Additional Number 1 or 2) and Call Forwarding are activated
for receiving calls.
NOTE
e
Besides
r
and
d
, you can set up your FOMA terminal to enable you to answer calls also by pressing any of
0
to
9
,
w
,
t
,
b
,
o
,
a
(
R
) or the assist key (Any key answer). However, pressing
a
(
R
) or the assist
key when a FOMA terminal is folded puts a call on hold. A hold tone sounds when “Setting when folded” is set to
“Tone on” and does not sound when it is set to “No tone” or “End the call”. You can also set a FOMA terminal to stop
only the ring tone when a key is pressed (Quick silent).
Ringing
Ａｎｓｗｅｒ ＦＵＮＣ
ＩｃｈｉｒｏＤｏｃｏｍｏ
Ringing (with Chaku-moji)
Ａｎｓｗｅｒ ＦＵＮＣ
ＩｃｈｉｒｏＤｏｃｏｍｏ
Ａｒｒｉｖｅｄ！
Function menu
¨
p.71