Foma N903i, Manual

Page: 316 / 580

314
GPS Function
Setting Positioning mode for
Request menu
1
GPS settings screen (p.307)
X
“Request menu”
X
“Positioning
mode”
X
Select any item
Setting the host
Set the host accessed for “Service settings”.
c There is normally no need to change this setting.
1
GPS settings screen (p.307)
X
“Request menu”
X
“Host selection”
X
Select a host
■
To add a host
X
Highlight “<Not recorded>” and press
o
(Edit)
X
Enter your security code
X
Enter
“Host name” and “Host address”
X
o
(Finish)
■
To edit a host
X
Highlight an item to edit, and press
o
(Edit)
X
Enter your security code
X
Edit “Host
name” and “Host address”
X
o
(Finish)
■ To delete a host
X
Highlight an item to delete, and press
p
(FUNC)
X
“Delete”
X
Enter your security code
X
“YES”
Making Service settings
Access a host set in “Setting the host” (p.314)
and make the settings for location request.
1
GPS settings screen (p.307)
X
“Request menu”
X
“Service
settings”
X
Make the settings
For how to make the settings, contact the service
provider.
d
If location information is
requested
If location information is requested by the other
party, the current location is positioned and the
information is provided to the party.
c
If the settings for each service are set to confirm
every time before sending, a confirmation
message appears.
Standard mode Gives priority to positioning fast.
Quality mode Positions slowly. The result is more
accurate than in Standard mode.
The accuracy may not be high
depending on the radio conditions,
etc.
Default setting
Standard mode
NOTE
e (recipient) and (requestor) are displayed under
“Location requested from”. However, if the requestor
is not stored in the phonebook, the phone number or
mail address
(requestor ID) may be displayed.
e
Sent location information may not reach the service
provider depending on the radio’s strength.
e
To cancel providing location information during
positioning, press
o
(Cancel). The location
information may be sent depending on the timing.
e
The recipient may not appear on the screen.
e
In Public mode (Driving mode), the following will
apply:
a If the settings for each service are set to confirm
every time before sending, location information is
not provided on request.
a
If the settings for each service are set to accept
location request, the ring tone, vibrator and
illumination do not work but the screen appears
and location information is provided.
Ｃａｎｃｅｌ
Ｌｏｃａｔｉｏｎ ｒｅｑｕｅｓｔ
Ｎｏｔｉｆｙｉｎｇ ｙｏｕｒ ｌｏｃａｔｉｏｎ
Ｐｒｅｓｓ ｃｌｅａｒ ｋｅｙ ｔｏ ｃａｎｃｅｌ
○○○○○○○○
○○○○○○○○
Ｌｏｃａｔｉｏｎ ｒｅｑｕｅｓｔ
Ｓｅｎｄｉｎｇ
Ｐｒｅｓｓ ｃｌｅａｒ ｋｅｙ
ｔｏ ｃａｎｃｅｌ
ＯＫ
Ｌｏｃａｔｉｏｎ ｒｅｑｕｅｓｔｅｄ ｆｒｏｍ：
ＸＸＸＸＸＸＸＸＸＸＸＸＸＸ
ＸＸＸＸＸＸＸＸＸＸＸＸＸＸ
Ｌｏｃａｔｉｏｎ ｒｅｑｕｅｓｔ
Ｃｏｍｐｌｅｔｅｄ
ＯＫ
Ｌｏｃａｔｉｏｎ ｒｅｑｕｅｓｔｅｄ ｆｒｏｍ：
ＸＸＸＸＸＸＸＸＸＸＸＸＸＸ
ＸＸＸＸＸＸＸＸＸＸＸＸＸＸ