Foma N903i, Manual

Page: 140 / 580

138
Tone/Display/Lighting Settings
<Backlight>
MENU70
Setting the Display and Keypad Lighting
1
i
X
“Settings”
X
“Display”
X
“Backlight”
X
Select any item
Default setting Lighting: ON (liSaver (Light time: 3 minutes) Charging: Standard Area: LCD+Keys
Brightness: Level 2
Lighting Specifies the normal display light operation.
If “OFF” is set, “ ” appears on the standby screen.
ON Specifies whether to set power saver mode.
ON
X
Enter the waiting time (01 to 20 minutes)
Once the specified waiting time has elapsed, the standby screen
and image display turn off (power saver mode).
Sets the waiting time before a FOMA terminal switches to power
saver mode.
OFF Disables power saver mode.
OFF Specifies whether to set power saver mode.
ON
X
Enter the waiting time (01 to 20 minutes)
Once the specified waiting time has elapsed, the standby screen
and image display turn off (power saver mode).
Sets the waiting time before a FOMA terminal switches to power
saver mode.
OFF Disables power saver mode.
Charging Specifies the display light operations during charging.
Standard The display light lights according to the “ON” setting in “Lighting”.
All time ON The display light stays on while charging.
Area Selects the display light area.
LCD+Keys Sets the LCD panel and keypad for the area.
LCD Sets only the LCD panel for the area.
Brightness Selects the brightness from “Level 3 to 1”.
NOTE
e
Pressing
5
for 1 second or longer also turns the display light on or off.
e
When “Lighting” is set to “ON”, the display light stays on while a call is being received, and lights for roughly 15
seconds when a FOMA terminal is turned on, one of the keys is pressed or the FOMA terminal is opened. The
display light also stays on while you are using the camera or playing a movie or i-motion. If you select “OFF”, the
display light does not turn on. However, the display light stays on during movie shooting regardless of the “Lighting”
setting.
e
If “Charging” is set to “All time ON”, the displays and dial keys are lit all the time following the “Area” setting
(“LCD+Keys” or “LCD”). If “Charging” is set to “Standard”, the display light operates following the “Lighting” setting.
e
Even if “Charging” is set to “All time ON” while charging, the brightness of the display light is set to “Level 1” in order
to increase the charging efficiency unless any keys are pressed for roughly 15 seconds.
e
The display light of the image display lights for about 15 seconds regardless of the “Charging” setting when
charging starts, and then stays on at “Level 1”.
e
The time for lighting the message of a mail or MessageR/MessageF varies depending on the length of the
message.
e
If a FOMA terminal switches to power saver mode while opened,
o
and
p
flash at roughly 5 seconds intervals.
Pressing any keys releases power saver mode.
e During a voice call, the display light works according to the power saver mode setting in “Lighting”. Pressing any
keys releases power saver mode.
e
Even if “Lighting” is set to “OFF”, the display light of the image display lights up while it shows communication such
as voice/videophone call, PushTalk, mail, message, Infrared data exchange or iC communication.