Festo SFC-DC series, Manual

Page: 93 / 202

5. Commissioning
5−9
Festo P.BE−SFC−DC−IO−EN en 0801a
5.3.1 Setting the axis type
1. Select the Festo positioning drive which matches your
positioning system.
Size 10, stroke 50 [SLTE_10_50_G04] <Enter>
Size 10, stroke 80 [SLTE_10_80_G04] <Enter>
Size 16, stroke 50 [SLTE_16_50_G04] <Enter>
Size 16, stroke 80 [SLTE_16_80_G04] <Enter>
Size 16, stroke 100 [SLTE_16_100_G04] <Enter>
Size 16, stroke 150 [SLTE_16_150_G04] <Enter>
2. Save the setting with SAVE <Enter>.
5.3.2 Setting the reference run parameters
In order to search for the reference point and for positioning
the drive in the axis zero point, you can set two different
speeds. The maximum possible speed during the reference
run is limited at the factory to 10 mm/s.
Depending on the referencing method, the reference point is
defined by means of a reference switch or fixed stop.
}
Settings
Axis type
SLTE10_50_G04
SLTE10_80_G04
SLTE16_50_G04
SLTE16_80_G04
SLTE16_100_G04
SLTE16_150_G04