Festo SFC-DC series, Manual

Page: 73 / 202

4. Control panel (only type SFC−DC−...−H2−...)
4−11
Festo P.BE−SFC−DC−IO−EN en 0801a
4.2.3 Device control HMI control"
For selecting the menu commands [Positioning] and [Settings]
you will require the setting HMI on". Only then is the SFC−DC
ready to process user entries on the control panel.
When selecting the menu commands, you will be requested
to modify the HMI setting.
[HMI control] You can also modify the setting directly with the menu com
mand [HMI control].
HMI
1)
Device control
on The device control is carried out manually via the control
panel. The control interface of the SFC−DC is deactivated
and the control enable is set. The actual statuses of all
inputs then have no effect.
When control via the control panel is activated, the drive
cannot be stopped with the STOP input.
off
The device control is carried out via the control interface
of the SFC−DC.
1)
H uman M achine I nterface