Festo SFC-DC series, Manual

Page: 131 / 202

6. Diagnosis and error treatment
6−3
Festo P.BE−SFC−DC−IO−EN en 0801a
6.1 Diagnostic options
The SFC−DC offers the following possibilities of diagnosis and
fault treatment:
LEDs indicate the readiness to operate, positioning status
and faults.
The outputs of the control interface of the SFC−DC−...−IO:
READY indicates the readiness to operate.
MOTION COMPLETE indicates whether a positioning
task is completed.
ERROR indicates an error in the SFC−DC.
The control panel of the SFC−DC−...−H2−IO:
The LC display shows diagnostic data, fault messages,
the operating mode, the current position set, target
and actual positions as well as speed.
The FCT (with active device connection):
Display of the current position set, target and actual
positions as well as speed.
Display the operating mode, special outputs and
operating states as swell as fault messages of the
connected SFC−DC.