Festo SFC-DC series, Manual

Page: 107 / 202

5. Commissioning
5−23
Festo P.BE−SFC−DC−IO−EN en 0801a
5.4 Commissioning with the Festo Configuration Tool
5.4.1 Installing and starting the Festo Configuration Tool
The Festo Configuration Tool (FCT) is installed on your PC with
an installation program. The PlugIn SFC−DC is installed on
your PC together with the installation program of the Festo
Configuration Tool.
Please note
The PlugIn SFC−DC version V01.00.00 supports the follow
ing controllers of type SFC−DC−...−IO:
Hardware version V1.00 and later
Firmware version V1.10 and later
Check with later versions of the SFC−DC, whether an up
dated PlugIn is provided. If necessary consult the Festo
Service.
Please note
Administrator rights are required for installing the Festo
Configuration Tool.
You can install the Festo Configuration Tool from the CD ROM
as follows:
1. Close all programs.
2. Place the CD Festo Configuration Tool in your CD ROM
drive. If Auto Run is activated on your system, the installa
tion will start automatically and you can omit steps 3 and 4.
3. Select [Execute] in the starting menu.
4. Enter D:\setup (if necessary replace D by the letter of your
CD ROM drive).
5. Follow the instructions on the screen.