Festo SFC-DC series, Manual

Page: 83 / 202

4. Control panel (only type SFC−DC−...−H2−...)
4−21
Festo P.BE−SFC−DC−IO−EN en 0801a
3. Make sure that nobody can place his/her hand in the
positioning range of the moveable mass and that no
objects lie in its path.
Start the positioning procedure with START <Enter>.
During the positioning run the following information is
displayed:
the active position set Pos...
the target position x
t
the speed v
the current position x
a
.
Function
EMERG.
STOP With<Menu> you can interrupt the positioning
procedure (
>
Error mode EMERG.STOP; con
firm with <Enter>, then automatic return to the
status display).
Menu
DEMO
STOP With <Enter> you can interrupt the positioning
run Position set table" [Demo pos tab]. The
current positioning set will be processed be
fore the axis stops. A new start will be made
with position set 1.
Enter
...
Warning
Motor moves...
ESC <Menu>
START <Enter>
...
Pos 1
X
t
= 100.00 mm
v = 20 mm/s
X
a
= 90.00 mm
EMERG.STOP<Menu>