Festo SFC-DC series, Manual

Page: 81 / 202

4. Control panel (only type SFC−DC−...−H2−...)
4−19
Festo P.BE−SFC−DC−IO−EN en 0801a
Carry out reference run
1. Use the arrow buttons to select [Positioning] in the main
menu and press the <Enter> button.
2. Select the menu command:
Reference run [Homing]
[Positioning] Manual Please note
[Homing] Reference run for determining
the mechanical reference
system First set the parameter in the menu [Settings]
[Homing parameter].
Factory setting: Referencing to stop in negative
direction.
3. Make sure that nobody can place his/her hand in the
positioning range of the moveable mass and that no
objects lie in its path.
Start the reference run with START <Enter>.
The following information is displayed:
the search speed v_rp to reference point,
the positioning speed to the axis zero point v_zp.
Function
STOP With <Menu> you can abort the reference run;
this automatically returns you to the status
display.
Menu
}
Positioning
}
Homing
Move posit. set
Demo posit. tab
Homing
Warning
Motor moves...
ESC <Menu>
START <Enter>
HOMING
v_rp = 7.7 mm/s
v_zp = 3.8 mm/s
STOP<Menu>