Festo SFC-DC series, Manual

Page: 80 / 202

4. Control panel (only type SFC−DC−...−H2−...)
4−18
Festo P.BE−SFC−DC−IO−EN en 0801a
4.2.5 Positioning" menu
Start reference run or positioning run for testing the position
sets.
Please note
·
Before starting the reference run, make sure that:
the positioning system is set up completely, wired
and supplied with power.
the parametrizing is completed.
·
Do not start a positioning run until the reference system
has been defined by means of a reference run.
Warning
Danger of injury.
With all positioning procedures the motor turns or the
connected axis starts to move.
·
Make sure that nobody can place his/her hand in the
positioning range of the moveable mass and that no
objects lie in its path.
Please note
Please note that position sets with speed v = 0 or invalid
target positions (−> Fault TARGET POSITION OUT OF LIMIT)
cannot be processed.