Festo SFC-DC series, Manual

Page: 79 / 202

4. Control panel (only type SFC−DC−...−H2−...)
4−17
Festo P.BE−SFC−DC−IO−EN en 0801a
Modify/deactivate password
[Password edit] Select [Settings] [Password edit] in the menu:
Enter the existing password with 3 figures. The current entry
position is marked with a question mark.
1. Use the arrow buttons to select a figure 0...9.
2. Confirm your entry with OK <Enter>. The next entry
position will be displayed.
3. Repeat the entry for the further entry positions.
4. Enter the new password with 3 figures. If you wish to
deactivate the password, enter 000".
5. After entering the third figure, save your setting with
SAVE <Enter>.
·
Keep the password for the SFC−DC in a safe place, e.g. in
the internal documentation for your system.
If the active password in the SFC−DC should be lost in spite of
care being taken:
You can delete it by entering a master password. In this case
please contact your Festo Service partner.
Enter password:
[ ? x x ] = 0
ESC <Menu>
EDIT <––> OK <Enter>
New Password:
[ ? x x ] = 0
ESC <Menu>
EDIT <––> OK <Enter>