Festo SFC-DC series, Manual

Page: 88 / 202

5. Commissioning
5−4
Festo P.BE−SFC−DC−IO−EN en 0801a
5.2 General instructions on commissioning
Caution
Faults may occur if you attempt to access control and oper
ating functions at the same time by the Festo Configuration
Tool and the control panel.
·
Make sure that the Festo Configuration Tool, the control
panel and the control interface of the SFC−DC are not
used at the same time.
Please note
In the following cases it is not permitted to write−access
the SFC−DC with the Festo Configuration Tool (e.g. down
loading parameters) or controlling (e.g. with Move man
ually" or when starting reference travel):
When the SFC−DC is currently performing a positioning
movement or when a movement is started during access
(e.g. via the control interface or via the control panel).
When parametrizing or operation with the control panel
takes place on the SFC−DC.
Please note the following:
·
The device connection in the Festo Configuration Tool
must not be activated when the control panel is being
used for control (HMI control = on").
·
Control with the control panel (HMI control = on") must
not be activated when the device connection in the Festo
Configuration Tool is activated.
·
Control by the Festo Configuration Tool must not be
activated while the drive is in motion or when control is
being carried out via I/Os.