Festo SFC-DC series, Manual

Page: 139 / 202

A. Technical appendix
A−3
Festo P.BE−SFC−DC−IO−EN en 0801a
A.1 Technical specifications
General information
Protection class as per EN60529
(plug connector inserted or fitted with protective cap)
IP54
Relative humidity 0 to 95 %, non−condensing
Temperature range
Operation
Storage/transport 0... + 40°C
− 25... + 60°C
Protection against electric shock
(protection against direct and indirect contact as per
IEC/DIN EN 60204−1)
By means of PELV power circuit
(ProtectedExtra−Low Voltage)
CE marking symbol
(see conformity declaration)
è www.festo.com
As per EU EMC directive
1)
Vibration As per DIN/IEC 68/EN60068 part 2−6:
0.35mm travel at 10 ... 60 Hz
5g acceleration at 60 ... 150Hz
Shock As per DIN/IEC 68/EN60068 part 2−27:
± 30g at 11ms duration
5 shocks in each direction
Temperature monitoring Switching off at temperature > 80 °C
Display resolution 128 x 64 pixels
Serial interface RS232, 9600 baud
Fitting Fitting on a wall or top−hat rail
1)
The device is intended for industrial use.
The maximum permitted I/O signal cable length is 30 m.