Festo SFC-DC series, Manual

Page: 44 / 202

2. Fitting
2−6
Festo P.BE−SFC−DC−IO−EN en 0801a
2.4 Notes on fitting of electric axes
Refer to the following documentation when fitting the electric
axis:
Operating instructions for the use of electric mini−slide
type SLTE−....
The instructions for the components used.
Warning
If a drive is fitted in a sloping or vertical position, the work
load may fall down and injure somebody.
·
Check whether additional external safety measures are
necessary (e.g. toothed latches or moveable bolts).
You can then avoid the working mass sliding down if there
is a sudden power failure.
Make sure that:
·
the drive is fitted securely and is free of distortion,
·
the work space in which the drive moves is of sufficient
size for operation with a work load,
·
the work load does not collide with any component of the
axis when the axis moves into the end position.