Festo SFC-DC series, Manual

Page: 150 / 202

B. Supplementary information
B−8
Festo P.BE−SFC−DC−IO−EN en 0801a
B.3.2 General Objects
Name Explanation Index
Scaling Defining the measuring system for the LCD display and scaling the
dimensions with a fixed factor 20D0
FCT Password Managing a password for the FCT software. Reset all passwords 20FA
Local Password Specify a password for enabling certain funct. via the control panel 20FB
User Device Name Specify a customer−specific device name 20FD
LCD Parameter Set LCD parameters such as LCD voltage and LCD contrast 20FF
B.3.3 Objects for parametrizing and commissioning
Name Explanation Index
Axis parameters Specify and read out axis parameters 20E2
Data Memory Control Save or delete EEPROM (non−volatile data storage).
Restore factory setting 20F1
Position Range Limit Limiting the positioning path (stroke) with a min" and a max"
limit value 607B
Home Offset Defines the project zero point as measurement reference point
relative to the physical reference point 607C
Polarity Change of direction with position specifications 607E
Gear Ratio Defining or reading the gear reduction (motor revolutions / power
take−off revolution) 6091
Feed Constant Defining or reading the feed constants
(positioning path / power take−off path e.g. spindle pitch)
6092
Homing Method Defining or reading the referencing (homing) method
(stop or reference switch) 6098
Homing Speeds Defining or reading the speeds during reference travel 6099
Drive data Defining or reading motor current values
Switch on /off the I/O interface 6510
Max Current Limiting the maximum current during reference travel 6073