Festo SFC-DC series, Manual

Page: 65 / 202

4. Control panel (only type SFC−DC−...−H2−...)
4−3
Festo P.BE−SFC−DC−IO−EN en 0801a
The Single Field Controller type SFC−DC−...−H2−... offers on the
control panel all functions necessary for commissioning, pro
gramming and diagnosing−.... An overview of the button and
menu functions for the SFC−DC−...−IO can be found in this
chapter. Commissioning with the control panel is described as
from chapter 5.3. Control panel functions for the field bus
variants can be found in the manual for the relevant product
variant.
With the SFC−DC−...−H0−... (without control panel) you can
carry out commissioning of the SFC−DC via the RS232 inter
face with the Festo Configuration Tool. Instructions on this
can be found in Section 5.4.2.
Caution
Faults may occur if you attempt to access control and oper
ating functions at the same time by the FCT and the control
panel.
·
Make sure that the FCT, the control panel and the control
interface of the SFC−DC are not used at the same time.
Please note
If necessary, remove any protective foil present on the dis
play before commissioning.