Festo SFC-DC series, Manual

Page: 23 / 202

1. System summary
1−5
Festo P.BE−SFC−DC−IO−EN en 0801a
For setting up an electric axis with the SFC−DC you will require
the following components:
Controller SFC−DC, optionally with control panel
Drive with motor Electric mini−slide type SLTE−... with accessories and if
necessary further components for the drive, such as fasten
ing elements, etc.
Power unit For operating and load voltage supply: 24 V DC
Power supply cable For supplying the SFC−DC with operating and load voltage
(see accessories, appendix A.2).
Motor cable For connecting the electric mini−slide SLTE to the SFC−DC
(see accessories, appendix A.2).
Control cable For transfer of information between the higher−level
controller and the SFC−DC (see accessories, appendix A.2).
Programming cable For transfer of information between the higher−level
controller and the SFC−DC (see accessories, appendix A.2).
Reference switch Optional: suitable sensor (normally open) as reference
switch, e.g. type SME−10/SMT−10.
The SFC−DC supports the electric mini−slide SLTE−.... Consult
Festo if you wish to use other drives.
Supported
drive Manual Permitted
fitting
position
SLTE−... Electric mini−slide type
SLTE−... As desired