Festo SFC-DC series, Manual

Page: 109 / 202

5. Commissioning
5−25
Festo P.BE−SFC−DC−IO−EN en 0801a
Instructions on parametrizing and commissioning
Further information can be found in the help for the Festo
Configuration Tool with the command [Help] [Contents FCT
general] e.g.
help on working with projects and on adding a device
to a project
help on defining the measuring reference system
(referencing and reference coordinates).
The PlugIn SFC−DC for the Festo Configuration Tool supports
all the steps necessary for commissioning an SFC−DC.
With the PlugIn SFC−DC for the Festo Configuration Tool the
necessary parametrizings can be carried out offline, i.e. with
out the SFC−DC being connected to the PC. This enables the
actual commissioning to be prepared, e.g. in the design office
when a new system is being planned.
Further information can be found in the PlugIn help:
Command [Help] [Contents of installed PlugIns] [Festo
(manufacturer name)] [SFC−DC (PlugIn name)], e.g.:
for describing the dialogues of the Device SFC−DC"
for describing the work steps for commissioning
for the basic functions: Device connection, Device names,
Device control and for password protection.