Festo SFC-DC series, Manual

Page: 147 / 202

B. Supplementary information
B−5
Festo P.BE−SFC−DC−IO−EN en 0801a
Carry out the following steps:
·
Connect the SFC−DC to your PC via the RS232 interface.
Note here the instructions in chapter 3.6.
·
If necessary, adapt the PC interface to the following trans
mission protocol.
Transmission protocol
Transmission speed (baud rate) 9600 Baud
Data format Asynchronous character frame:
1 start bit
8 data bits
no parity bit
1 stop bit
·
Initialize the data transmission with the following com
mand:
Command
310D
h
Reply
31310D
h
1 <CR> 11 <CR>
·
Select the commands in accordance with the Object list in
appendix B.3
·
Use only CI commands if you already know their effects
and if they are permitted for your SFC−DC.
·
Transfer the commands with a terminal program.
For the syntax of the commands see appendix B.4.