Festo SFC-DC series, Manual

Page: 54 / 202

3. Installation
3−10
Festo P.BE−SFC−DC−IO−EN en 0801a
3.4 Motor connection
The motor connection is used to control the motor of the con
nected SLTE, and to transfer the encoder signals.
Please note
To connect the SLTE, use exclusively one of the following
cables from the Festo accessories:
motor cable KMTR−DC−SUB−15−M12−...
cable length max. 10 m.
Connection Pin Designation Function
1 +5VDC VCC logic
8 1
2 O Encoder channel A (RS485)
3 A/ Encoder channel A/
15 9
4 B Encoder channel B (RS485)
5 B/ Encoder channel B/
6 C Encoder channel C (RS485)
7 C Encoder channel C/
8 GND logic GND logic
9 GND GND
10 GND GND
11 GND GND
12 Motor + Motor +
13 Motor − Motor −
14 GND GND
15 GND GND
Plug housing Cable screening/shield
Tab.3/5: Connection Motor" on the SFC−DC