Festo SFC-DC series, Manual

Page: 68 / 202

4. Control panel (only type SFC−DC−...−H2−...)
4−6
Festo P.BE−SFC−DC−IO−EN en 0801a
4.2 The menu system
4.2.1 Accessing the main menu
When the power supply is switched on, the SFC−DC automati
cally carries out an internal check. At first the display shows
the Festo Logo then changes to the status display. The status
display shows the following information:
the type designation of your SFC−DC
the type designation/type of the parametrized drive
the current position of the drive x
a
= ....
the current setting of the device control
(HMI = Human−Machine Interface)
The main menu is accessed from the status display with the
button <Menu>. The current button function will be displayed
in the lower lines of the LCD display.
Function Button
{ }
With the arrow buttons on the control panel
you can select a menu item from the list. The
current selection is marked with an arrow (
}
Diagnostic). Select the menu item
S
in order
to display further menu items (HMI control...).
v
V
ESC With <Menu> you can interrupt the current entry
and return in stages to the higher−order menu
level or status display.
Menu
OK With <Enter> you can confirm the current
selection or entry.
Enter
Tab.4/2: Button function (menu selection)
SFC–DC...
SLTE...
Xa = 0.00 mm
HMI:off
<Menu>
}
Diagnostic
positioning
Settings
S
ESC <Menu>
<––> OK <Enter>
}
HMI control
LCD adjustment
S
ESC <Menu>
<––> OK <Enter>