Festo SFC-DC series, Manual

Page: 67 / 202

4. Control panel (only type SFC−DC−...−H2−...)
4−5
Festo P.BE−SFC−DC−IO−EN en 0801a
The visual display of the operating states is shown via 3 LEDs
(see also chapter 6.2).
Power: Display of the readiness to operate
I/F: Positioning status
Error: Fault
Function Button
MENU Activated by the status display from the
main menu
Menu
ESC Rejects the current entry and switches
back in stages to the higher−order menu
level or status display
EMERG.STOP Interrupts the current positioning
procedure (
>
Error mode; confirm with
<Enter>, then automatic return to the
status display)
OK Confirms the current selection or entry
Enter
SAVE Saves parameter settings permanently
in the EEPROM
Enter
START/STOP Starts or stops a positioning procedure
(only in Demo mode). After stop:
Display of the current position, with
<Menu> return to the higher−order menu
level.
{ }
Scrolls within a menu level in order to
select a menu command.
v
EDIT Sets the parameter V
Tab.4/1: Button function (overview)