Festo SFC-DC series, Manual

Page: 105 / 202

5. Commissioning
5−21
Festo P.BE−SFC−DC−IO−EN en 0801a
4. Complete or correct the speed.
·
Select [Position].
·
Set the nominal speed with the arrow buttons.
·
Accept the setting with OK <Enter>. The setting will
then become effective in the drive.
5. Complete or correct the acceleration value of the acceler
ation ramp of the position set.
·
Select [Acceleration].
·
Set the nominal acceleration with the arrow buttons.
·
Accept the setting with OK <Enter>. The setting will
then become effective in the drive.
6. Complete or correct the acceleration value of the braking
ramp of the position set.
·
Select [Deceleration].
·
Set the nominal acceleration with the arrow buttons:
·
Accept the setting with OK <Enter>. The setting will
then become effective in the drive.
7. Save the position set table with [SAVE]. Only then will the
settings be retained even if the power supply is switched
off or if there is a power failure.
8. Enter the next position set.