Festo SFC-DC series, Manual

Page: 116 / 202

5. Commissioning
5−32
Festo P.BE−SFC−DC−IO−EN en 0801a
Input Status START (input)
I8 0
>
1 Start of the position set.
The position set can be stopped (abort) with a falling edge at
the input STOP. If started again, the position set will be pro
cessed again as from the current position.
MC: O1 Motion Complete.
A 0−signal at output MC indicates that a positioning pro
cedure is being carried out (see also section 5.6.2).
A 1−signal at output MC indicates that a positioning
procedure has been completed.
Output Status MC (output)
O1 0−signal Positioning procedure is being carried
out
There is a fault
1−signal Positioning procedure is completed,
no fault.
READY: A2 Ready for operation, all preconditions for starting a position
ing procedure have been met.
Output Status READY (output)
O2 0−signal System is not ready to operate.
0−signal active at ENABLE or
There is a fault or
0−signal active at STOP.
1−signal System is ready to operate.
1−signal active at ENABLE and
No fault and
STOP is set.