Ezgo 1600xd, Repair Manual

Page: 301 / 416

10
-9
SUUV-W00 Apr. 2011
SAFETY
FIRST
GENERAL
ENGINE
CVT
TRANSMISSION
CHASSIS
REAR AXLE
BRAKE
FRONT AXLE
STEERING
HYDRAULIC
ELECTRIC
INDEX
Remove the rack (1) by pulling it to the side. 6.
UUVW911A
Assemble in the reverse order of disassembly. 7.
UUVW912A
When removing the cap, be careful not to damage
the oil seal. If a new oil seal is to be fi tted, apply
grease to its mating surface.
During assembly, apply grease to the engaging
sections of the gears and in the case suffi ciently.
•
•
REMARK
5.2 STEERING COLUMN REMOVAL AND
INSTALLATION
UUVW914A
Disconnect the connectors for the instrument cluster
(1), power supply, ignition switch and combination
switch (2). 2.
UUVW915A
Unscrew the screws for the selective shift lever (1),
differential lock lever (2) and front wheel drive lever (3)
and remove their grips. 3.
Open and support the hood, disconnect the headlamp
connector (1) and unscrew the ratchet mounting bolts
(2) (M8, 4 EA) to remove the hood. 1.
UUVW561A UUVW910A
Remove the cap (1) and pull out the pinion shaft (2). 5.
STEERING SYSTEM - DISASSEMBLY, SERVICE AND ASSEMBLY
UTV(EZGO향)_10_STEERING.indd 9 UTV(EZGO향)_10_STEERING.indd 9 2011-04-04 오후 4:23:09 2011-04-04 오후 4:23:09